SerVision CVG-M Technical Information PDF herunterladen (Seite 50)

SerVision Embedded Video Gateway System Guide

Configuring System Settings 49

Figure 49: SSIDs in Range

5. If the access point requires an encryption key, under Key, fill in the encryption key.

6. If you want to assign a static IP to the unit, clear the DHCP Enabled checkbox. The fields required to

configure the static IP are added to the screen.

Figure 50: Static IP settings

Fill in the fields as follows:

Field

Description

IP Address

Specify the static IP address of the unit in the wireless network. The address should conform

to the standards used in the wireless network.

Mask

Fill in the subnet mask used in the wireless network.

Default

Gateway

Fill in the IP address (on the wireless network) of the gateway used for WAN or internet

access.

If you do not know the internal IP address of the gateway, consult the network administrator.

Note: If this field is not filled in correctly, external network services will not be available

through this network. These include accessing the unit remotely (even through proxy and

DDNS services), SMS and e-mail notifications, and other network services.

DNS

Fill in the IP address of the DNS server used by the access point. A DNS server enables you to

enter names instead of IP addresses for the proxy and DDNS servers.

If you do not know the IP address of the DNS server, consult the network administrator.

Note: If this field is not filled in correctly, you will not be able to specify IP addresses as host

names. For example, the address of the SMTP e-mail server will have to be defined as IP

numbers. In addition, DDNS will not perform updates if there is no valid DNS address.

7. If you want the unit to test the connection to this access point periodically, select Verify. The fields required to

configure this option are added to the screen.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 202 203

Keine Kommentare

SerVision CVG-M Technical Information Seite 50