SerVision CVG-M Technical Information PDF herunterladen (Seite 25)

SerVision Embedded Video Gateway System Guide

Configuring System Settings 24

 Field

 Description

Outline Switching

Select one of the following types of triggers for activating different outlines:

 None: No automatic outline switching – outlines can only be

switched manually using the configuration utility (see

Defining

Alternate Outlines, page 118)

 Sensor: Makes it possible to use Sensor 1 events as triggers for

outline switching (see

Configuring Sensor and Activator

Settings,

page 110)

Note: For CVG and CVG-M models, this option should not be selected if the

sensor connector (In1) is used to control the display on a connected CCTV

monitor. For additional information, please refer to the unit’s installation

guide.

 Schedule: Makes it possible to schedule outline switching (see

Schedules

, page 73)

LAN Optimization

If video from the unit will be viewed primarily or exclusively on PCs that are on the

same LAN as the unit, select this option to minimize the streaming delay within the

LAN. That is, when this option is selected, live video will be played as close to real

time as possible.

Clear this option if live video will be viewed remotely via the internet or a modem

connection.

SMS on System Start

Select this option if you want the unit to send SMS notifications whenever it starts

running.

ADAM Sensors

If sensors are connected to the unit through an ADAM module, select Enabled.

This makes it possible to activate and configure the sensors. For additional

information, see

Configuring Sensor and Activator

Settings, page 110.

IA Activators Used

If activators are connected to the unit through an IA relay board, select the number

of activators that are connected to the board. For additional information, please

refer to the unit’s installation guide.

IA Sensors Used

If sensors are connected to the unit through an IA relay board, select the number

of sensors that are connected to the board. For additional information, please refer

to the unit’s installation guide.

Maximum Recording

Length

If you want recorded video to be erased automatically after a specified period of

time, select the desired time period. A day is defined by the system as beginning at

midnight. For example, if you select “1,” the system saves all video that was

recorded from midnight yesterday on. Video that was recorded before midnight

yesterday is automatically erased.

Note: When video is erased in this way, the storage space it occupied on the unit’s

storage media is not made available for additional recordings.

3. Click Update, and then save the settings. They will be implemented after the unit is restarted (see Saving

Configuration Changes, page 125).

Configuring Microphone and Speaker Volume

The volume of attached microphones and of the internal speaker can be digitally increased or decreased by the

Video Gateway. Microphone volume can be modified to optimize the sound level of audio that is played by client

software. Internal speaker volume can be adjusted to suit the location of the Video Gateway unit and the needs of

those on-site.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 202 203

Kommentare zu diesen Handbüchern

Keine Kommentare

SerVision CVG-M Technical Information Seite 25

Kommentare zu diesen Handbüchern