SerVision CVG-M Technical Information PDF herunterladen (Seite 47)

SerVision Embedded Video Gateway System Guide

Configuring System Settings 46

Field

Description

PIN Code

If the SIM card of the modem requires a PIN to establish a connection, select Use. The

PIN Code field is added to the screen.

Type the PIN code into the field.

Dial Number

The phone number that the modem should dial to connect to the internet via the GSM

cellular network. This number is normally *99# throughout the world.

Use CHAP

Select Enabled if the cellular supplier uses CHAP authentication.

4. Click Update, and then save the settings. They will be implemented after the unit is restarted (see Saving

Configuration Changes, page 125). At that time, if the unit is not connected to a cable-based LAN, it will

attempt to connect to the cellular network.

WiFi

WiFi settings configure the system to use a WiFi card when one is connected to one of the unit’s USB ports (see the

installation guide). You can specify up to ten WiFi access points to which you want the router to be able to connect.

When the WiFi card is correctly configured, the router automatically establishes a connection to one of the specified

wireless networks if its access point (hotspot) is within range. If the access point is connected to the internet, the

Video Gateway can use this connection to connect to the internet in order to send and receive data.

When the unit is connected to a WiFi network, the WiFi status displayed in the System Summary screen, in the

network settings, is “Connected,” and the Video Gateway's IP in the wireless network is displayed.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 202 203

Keine Kommentare

SerVision CVG-M Technical Information Seite 47