SerVision CVG-M Technical Information PDF herunterladen (Seite 105)

SerVision Embedded Video Gateway System Guide

Configuring Camera Settings 104

Erasing Recorded Video

Recorded video is normally stored on the storage media until one of the following occurs:

 The video is over-written by newer video.

 You change the recording size or disk allocation settings of one of the cameras (see Advanced Recorder

Settings, page 97).

You can also erase all recorded video from the storage media manually in one of the following ways:

 Erase all recorded video from a selected camera

 Erase all recorded video from all cameras but leave the current disk allocation unchanged

 Erase all recorded video from all cameras and reset the disk allocation to its default settings

Erasing All Recorded Video from a Camera

You can choose to erase all the recorded video from a selected camera that is stored on the unit’s storage media.

This is particularly useful if you have chosen to record linearly (selected Write Protect in the camera’s advanced

recorder settings) and the disk space allocated to the camera is full.



To erase all recorded video from a camera:

1. In the Camera Summary screen, in the Recorder column, in the camera’s row, click Erase.

Figure 114: Erasing video from a camera

2. You are prompted to confirm that you want to erase the video:

Erase recorded video

from Camera 3

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 202 203

Keine Kommentare

SerVision CVG-M Technical Information Seite 105