SerVision CVG-M Installationsanleitung PDF herunterladen (Seite 4)

SerVision CVG-M Installation Guide

Introduction 3

Introduction

This guide explains how to set up the hardware components of SerVision’s CVG-M security system. The CVG-M

belongs to SerVision’s line of embedded Video Gateway units. These units provide state-of-the-art security

functionality, including live video streaming, video recording and playback, motion detection, sensor management,

real-time event notification, and device activation. All of these features can be accessed remotely via PC, PDA, or

cellular telephone.

The CVG-M is optimized for deployment in vehicles and other mobile platforms or remote locations in which a

LAN connection is not available. It has built-in support for cable-based and cellular networking, and contains an

internal GPS receiver that makes it possible to track its location and route. It can also be integrated with some fleet-

management systems (such as the Galooli system; see http://www.galooli.com/solutions/galooli-fleet/

Once the CVG-M has been installed as explained in this guide, it must be configured. Configuration is performed

by connecting to the CVG-M unit using a PC that is on the same network as the unit (or connected to the unit

directly using a LAN cross cable) and opening the unit’s configuration utility in a browser. For additional

information about configuring your CVG-M, please refer to the Embedded Video Gateway System Guide.

Client software is used for accessing the CVG-M unit remotely in order to view video and events and control the

system in various ways. SerVision offers client software for PCs and for certain cellular telephone and PDA

models. Full instructions for the use of the client applications are available in separate manuals, which can be

downloaded at http://www.servision.net

1 2 3 4 5 6 7 8 9 ... 37 38

Keine Kommentare

SerVision CVG-M Installationsanleitung Seite 4